IMET KS 620 semi-automatic bandsaw

Band saws

IMET KS 620 semi-automatic bandsaw

102 890,00 zł net

Add to favorites

12 months of warranty

Contact with a trader:
Krzysztof Penkowski
E-mail: krzysztof.penkowski@eurometal.com.pl
Telefon: 603 400 333

The IMET KS 620 semi-automatic cutter is the only one in its class that can cut at an angle of 60° to the right and left after once putting on a locking vice. The vice slides transversely on the supporting surface with a lock and quick approach.

Quantity

Locking vice and material

Vice slides transversely on the work surface, linear guides, locking and quick approach, complete with standard pressure reducer. All KS series saws (450, 502, 620 and 652) allow you to attach a vice to press the material once and then rotate the arc to cut both right and left (up to 60°).

Large work table

Easy to use thanks to the rotating work surface integrated in the arc and blade transition to optimize the material support system when machining at any angle.

Cutting precision

Cutting precision is ensured by a graduated scale (on the work surface), which provides a visual reference point for the operator when cutting at an angle. There are also automatic stops at 45° left, 0° and 45° right. To increase cutting precision, IMET band saws are equipped with a system for detecting the cutting degree from the center.

Steel frame and blade slope

In electro-welded steel, the blade has an inclination of 6°, which improves penetration into the material and optimizes cutting performance. The rotation of the arc is achieved by preloading the bearing. The KS 620 blade has a tension of 2000 kg/cm2 and is equipped with a micro-switch that allows immediate stopping in the event of a blade break or power failure.

Angled blade

The KS 620 and all KS series saws finish cutting with a blade inclined at an angle of 6°, which facilitates the penetration of the blade into the material and allows you to always cut a fragment of the material even in the presence of solid objects.

Material detection device

To make it easier for the blade to approach the material, the KS450 has a device for automatically detecting the starting and ending point of cutting. The machine offers the option of removing the device if you want to increase cutting efficiency at 0° and 45° (right and left).

Cleaning the blades

Motorized nylon blade cleaning brush, driven by the motor pulley to always keep the cutting blade in perfect condition.

Control panel

The KS 620 is equipped with a mobile control console with an LED that controls blade tension, blade guard opening, motor thermal lock and electrical voltage. Through the controls, the operator can choose between 3 different ways to complete the cut: lifting the arc with the blade stopped, raising the arc with the blade moving and ending the cycle without lifting the arc.

Device features:

Maximum cutting diameter: ø 500 mm (with height sensor turned off)
Working feed: gravity arm drop; smooth regulation
Arm lifting: hydraulic
Angle cutting: right 0° - 45° - 60°; left 0° - 45° - 60°
Cutting band dimensions: 5320 x 34 x 1.1mm
Belt speed: 15 - 100 m/min (stepless adjustment)
Hydraulic vice

Standard equipment:

Cooling system
Bimetallic tape – 1 piece in the machine
User manual in English
CE certificate

Optional equipment (additionally paid):

Roller feeders
Measure with bumper
Connector
Oil mist lubrication system (micronizer)
Strain gauge for precise setting of belt tension

Technical data	Unit	Value
The width of the cutting band	[mm]	34
Vise opening width	[mm]	600
The dimensions of the cutting band	[mm]	5320x34x1.1
Cutting band speed	[m/min]	15-100
Cutting band motor power	[kW]	3
Working height	[mm]	805
Dimensions	[mm]	1705x2500x2500
Weight	[kg]	1450

Machine categories