Band saws
IMET H 820 column semi-automatic band saw
205 890,00 zł net
No rating
12 months of warranty
IMET H 820 two-column semi-automatic band saw designed for straight cuts with hydraulic arc movement. The machine is an excellent and ideal tool for working with pipes of various sizes and is also efficient for large metal carpentry work thanks to the 10° inclined saw blade, which increases its efficiency.
Quantity
Add to cart
The machine has a strong, rigid saw frame made of electro-welded steel with a thick cross-section; To increase cutting efficiency and reduce binding, vibration and slowdown, the blade is tilted 10° at high tension (2000 kg/cm²).
Wide working area with excellent support over the entire material surface to increase cutting stability.
All machine movements are ensured by state-of-the-art guides with recycled ball screws (system used for arc movement, vice and movable blade guides) with high static and dynamic load capacity to avoid friction.
The H 820 is equipped with a laser system that detects the first point of the starting cut; the laser automatically detects the material as it lowers the saw frame, allowing you to optimize cutting time and efficiency. Final cutting is performed using a mechanical microswitch.
Control from the machine panel gives full control over the cutting process; the lowering of the saw frame is controlled by two hydraulic regulators located on the control panel; these adjusters act on the lowering speed and penetration force of the blade.
There is also an integrated and removable residue collection tank with lubrication device, equipped with an electric pump and section taps. Three ways of operation: always on, working only during cutting process, always off.
- Maximum cutting diameter: ø 810 mm
- The tape is inclined at an angle of 5 degrees to the material
- Hydraulic belt tension (2000 kg/cm2)
- Smooth feed regulation
- Arm lifting: hydraulic
- Straight cut
- Cutting band dimensions: 7575x41x1.3 mm
- Belt speed: 15 - 100 m/min (stepless regulation - inverter)
- Hydraulic vice
- Motorized brush
- Laser sensor for detecting the beginning of material
| Technical data | Unit | Value |
|---|---|---|
| The width of the cutting band | [mm] | 41 |
| Vise opening width | [mm] | 810 |
| The dimensions of the cutting band | [mm] | 7575x41x1.3 |
| Cutting band speed | [m/min] | 15-100 |
| Cutting band motor power | [kW] | 4 |
| Working height | [mm] | 900 |
| Dimensions | [mm] | 1150x3375x3100 |
| Weight | [kg] | 2300 |
Recommended
Newsletter
Sign up for our newsletter.
