Optional equipment (additionally paid):

Industry 4.0 Ready - SAWFACTORY
All the automatic saws in the BS range can be connected to the company network via modem: the dedicated software SAWFACTORY is also available for teleservice, assistance, programming and remote management of the cutting process. The software allows you to transfer data and programs from the PC (where the program is created) to the machine via USB.

Automatic sawframe rotation with 2 position
CUBO 350 NC (Flat and Box) are compatible with the automatic sawframe rotation device. The system has mechanical stops with 2 positions and allows to optimize user workflow with mitre cutting on a same bare in automatic cycle.

Bundle cutting device
The CUBO automatic band saws (FLAT-BOX version) can be used with the bundle cutting device. The bundle cut can only be used for 0° cutting. Single piece capacity with mounted device: 350x160mm max, 55x10mm min. Cutting capacity for bundle is: max 300x160mm, minimum 85x10mm. The device can be diassembled using the 2 screws on the fixed vice and the 2 on the carriage vice and disconnecting the hydraulic tubes using the quick couplings systems. Not compatible with laser ray (only one can be put on the same machine).

Minimal lubrication system
It is possible to request for any machine the minimum lubrication which eliminates the dispersion of coolant typical in the use of emulsifiable oil, the duration of the blade is in no way affected.

Motorized chip conveyor
It's available for all the CUBO SERIES bandsaw an optional motorized screw chip conveyor placed laterally (on the unload side) of the machine. The chip conveyor allows to optimize the machine efficiency by removing chips while cutting.

Laser ray
The device tracks the cutting line on the material during the saw frame descent. Not compatible with hydraulic bundle device (only one of the two can be put on a single machine).

Angle digital display