• Working feed: hydraulic arm drop; smooth regulation
• Arm lifting: hydraulic
• Angle cutting: right 0° - 45° - 60°; left - 45°
• Cutting band dimensions: 3370 x 27 x 0.9 mm
• Band speed: 2 cutting speeds 37/74 m/min
• Vice – hydraulic clamp

Standard equipment:

• The BS 300 PLUS is equipped with a large diameter work area and a system of automatic easy stops at 0°, 45° and 60° left and 45° right, with a scale plate to identify and set different angles.
• The vice has adjustable guides that can be moved freely along the work table, allowing for quick approaching and camping.
• The machine's saw frame is made of rigid tubular cast iron, with 320 mm pulleys, high blade tension of 1700 kg/cm2 and prevention of excessive blade tension thanks to front adjustment and micro-switch controller.
• Blade to protect the blade, allowing easy access for maintenance when needed; blade guide system with hard pads, additional side bearings ensure perfect blade positioning.
• Safe start thanks to a button on the handle with a warning light informing the user about the correct functioning of the machine. The coolant tank and electric pump are located inside the floor stand.
• If necessary, an electronic variable blade speed inverter allows the operator to use the keyboard to adjust the machine to cut a wide range of materials and different cross-sections. The speed is changed using an inverter and does not affect the engine power even at low speeds.

• A minimum lubrication system can be required for all Imet machines, this avoids the dispersion of liquid refrigerant typical when using emulsifying oil, this does not in any way affect the life of the blade.
• Adapter for synchronizing the RTP/RTD table with the saw movement.
• Laser beam.
• Hydraulic vice pressure reducer (only for SHI version).
• Only in SHI version, hydraulic device for cutting bundles (max. 250x130mm, min. 85x10mm).
• Foot pedal with 3.3 m cable (only for SHI version).