Pipe and section bending machines - with mandrel
SOCO V SB-30x4A-3SV electric CNC pipe bender
317 730,00 zł net
No rating
12 months of warranty
SOCO V series hydraulic bending machines equipped with CNC control and servo motor drives for 4 axes, with the possibility of mounting up to 3 stacks of dies. The unique DGT bending head drive system, using a gear transmission and a servo motor drive, ensures even greater bending efficiency and stability. The machines enable bending of radii equal to 1D (depending on the elongation factor of the material) and bending of large radii on rollers.
Quantity
Add to cart
SOCO V series hydraulic bending machines equipped with CNC control and servo motor drives for 4 axes, with the possibility of mounting up to 3 stacks of dies. The unique DGT bending head drive system, using a gear transmission and a servo motor drive, ensures even greater bending efficiency and stability. The machines enable bending of radii equal to 1D (depending on the elongation factor of the material) and bending of large radii on rollers.
Main features of the device:
- Unique head design – DGT system
- CNC controller with touch screen
- The tube carriage is fed using a toothed rack and a servomotor
- Possibility to mount multiple stacks of dies and rolls – for large radii
- Programmable force of the supporting device for 1D bending
- Programmable arc length for large radii
- Material elasticity compensation for roll bending
- Compensation for die bending
- Entering data in the YBC and XYZ system
- Possibility to convert data from XYZ to YBC
- The bending arm is equipped with an additional actuator supporting the bending process - booster
- Electrical system equipped with a cooling system
- Automatic lubrication system for the mandrel increases its life as well as the quality and accuracy of bending
- Smoothing die support with lubrication
- The control panel is placed on a movable base, enabling the most favorable positioning for the operator
Main control features:
- Operating system running under Windows
- Mitsubishi servomotors that feed and rotate the pipe
- Possibility to save programs on hard disk or FDD
- Ability to store 30,000 files (up to 110 bends per pipe)
- Possibility of 3D visualization of the bent model
- Possibility to convert from YBC to XYZ and vice versa
- Possibility of freely rotating the element on the display
Standard equipment:
- Early pin retraction system
- Automatic pin lubrication system
- Central lubrication system
- Bending die support system
- Portable control panel
- User manual in English
- CE Declaration of Conformity
| Technical data | Unit | Value |
|---|---|---|
| Diameter of the bent pipe (steel) | [mm] | 1.5 - 30 |
| Diameter of the bent pipe (stainless steel) | [mm] | 1.2 - 25.4 |
| Tube length with mandrel | [mm] | 2670 |
| Bending radius | [mm] | 120 |
| Bending angle | [°] | 190 |
| Bending accuracy | [°] | +/- 0,1 |
| The accuracy of the positioning movements | [°] | +/- 0,1 |
| Accuracy of the feed | [°] | +/- 0,1 |
| Die bending radius - profile | [mm] | 2,5D – 4D |
| Die bending radius - pipe | [mm] | 1,5D – 4D |
| Bending radius on rollers - pipe | [mm] | 6D - ∞ |
| Roller bending radius - profile | [mm] | 8D - ∞ |
| 1D bending | [-] | Tak |
| Dimensions | [mm] | 3380x900x1200 |
| Weight | [kg] | 1800 |
Recommended
Pipe and section bending machines - with mandrel
Priced individually
No rating
Pipe and section bending machines - with mandrel
92 980,65 zł
No rating
Pipe and section bending machines - with mandrel
388 271,10 zł
No rating
Newsletter
Sign up for our newsletter.
